6 kW Hybrid Home Solar System with 16 kWh Storage
- PV array
- 6.2 kWp
- Inverter
- 6 kW
- Storage
- 16 kWh
- Daily yield
- ≈ 29 kWh
Deye's new OG03 single-phase off-grid inverter, available from 3 to 6.6 kW. It has 1 or 2 MPPTs, a 200% surge rating, 4 ms switchover and an IP65 enclosure, and it takes both grid and generator input.
5-year Deye manufacturer warranty, extendable up to 10 years depending on the installation country under Deye's warranty policy. We help you with any warranty claim.
The Deye SUN-(3-6.6)K-OG03LP1 is Deye's latest single-phase off-grid inverter. One compact wall-mounted unit holds a pure sine wave inverter, an MPPT solar charge controller and a battery charger. The range includes 3, 3.6, 4, 5, 6 and 6.6 kW models on a 48 V battery bus, plus a 3 kW 24 V version for small systems. The 3 to 4 kW models have one MPPT tracker. The 5 to 6.6 kW models have two.
On the solar side it accepts up to 500 V DC and tracks across a wide 150-425 V MPPT window. You can connect up to twice the rated power in PV panels (13.2 kWp on the 6.6 kW model), which raises output on short winter days and in cloudy hours. It works with lithium batteries, talking to their BMS over CAN or RS485, and with lead-acid banks. Charge and discharge current reaches 140 A.
It is built for unstable grids. It takes two AC sources, the national grid and a generator. When the power cuts out it switches to battery in about 4 ms, so computers, routers and satellite receivers keep running. It can deliver 200% of its rated power for 10 seconds to start fridges, air conditioners and water pumps. The IP65 enclosure weighs only 8.6 kg and runs below 46 dB. Up to 16 units can work in parallel for larger single-phase or three-phase systems, and the unit can be monitored remotely over Wi-Fi.
Full 3-6.6 kW range in one series, with single-phase 230 V pure sine wave output
1 MPPT (3-4 kW) or 2 MPPTs (5-6.6 kW), up to 500 V PV input, and PV arrays up to 2x the rated power
200% peak power for 10 seconds to start air conditioners, fridges and water pumps
About 4 ms switchover from grid to battery, so sensitive devices stay protected the way they would on a UPS
Two AC inputs, national grid and generator, with charging current set from the LCD
Works with lithium (BMS over CAN/RS485) and lead-acid batteries, with up to 140 A charge/discharge
IP65 enclosure, 8.6 kg, quiet below 46 dB, max efficiency 97.6%
Up to 16 units in parallel (single- or three-phase), with remote monitoring over Wi-Fi
Full specifications as published in the manufacturer's datasheet.
| Specification | Value |
|---|---|
| Battery type | Lead-acid or Lithium-ion (self-adapts to the lithium BMS) |
| Battery voltage | 40-60 V (48 V system); 20-30 V on SUN-3K-OG03LP1-24-EU-AM1 |
| Max. charge / discharge current | 3K: 70 A | 3.6K: 90 A | 4K: 95 A | 5K: 120 A | 6K: 135 A | 6.6K: 140 A | 3K-24V: 135 A |
| Specification | Value |
|---|---|
| Max. PV array power | 6000 W (3K) / 7200 W (3.6K) / 8000 W (4K) / 10000 W (5K) / 12000 W (6K) / 13200 W (6.6K) |
| Max. PV input power | 4800 W (3K) to 10560 W (6.6K) |
| Max. PV input voltage | 500 V / 125 V |
| MPPT voltage range | 150-425 V (full-load MPPT 300-425 V); rated 370 V |
| MPP trackers / strings | 1/1 (3K, 3.6K, 4K); 2/1+1 (5K, 6K, 6.6K) |
| Max. PV input current | 18 A (short-circuit 27 A); 18+18 A on 2-MPPT models |
| Specification | Value |
|---|---|
| Rated output power | 3000 / 3600 / 4000 / 5000 / 6000 / 6600 W (13.1 A to 28.7 A) |
| Peak power | 2x rated power for 10 s |
| Output voltage / frequency | 230 V (L+N+PE), 50/60 Hz, pure sine wave |
| Power factor / THDi | <3% |
| Transfer time | 4 ms |
| Specification | Value |
|---|---|
| Grid / generator input | 230 V, 50/60 Hz, 35 A each; max AC charging power to battery equals the rated power (3000-6600 W) |
| Specification | Value |
|---|---|
| Efficiency | Max 97.6% / Euro 96.5% / MPPT >99% |
| Specification | Value |
|---|---|
| Integrated protections | DC reverse polarity, AC output overcurrent / overvoltage / short-circuit, thermal protection, insulation impedance detection, DC component monitoring |
| Surge protection | Type II (DC), Type II (AC) |
| Ingress protection | IP65 |
| Specification | Value |
|---|---|
| Operating temperature | -40 to +60 °C (derating above 45 °C) |
| Dimensions / weight | 323 x 424 x 176 mm (W x H x D, without connectors and brackets) / 8.6 kg |
| Noise / cooling | <46 dB / intelligent air cooling |
| Display & communication | LCD display; RS485, CAN; Wi-Fi (built-in Wi-Fi & Bluetooth on the Sept 2026 datasheet, optional on earlier units) |
| Parallel operation | Up to 16 inverters (single- or three-phase) / up to 32 batteries |
| Specification | Value |
|---|---|
| Warranty | 5 years (up to 10 years depending on installation country) |
Specifications are taken from the manufacturer's datasheet and may be updated by the manufacturer without notice. See the datasheet for full details.
Provided by the manufacturer under its own terms.
5-year Deye manufacturer warranty, extendable up to 10 years depending on the installation country under Deye's warranty policy. We help you with any warranty claim.
Keep your purchase invoice and note the model and serial numbers — you'll need them for any warranty claim.
Warranty & returns policySize the right system for your appliances and your governorate's outage hours in a minute — or message us and we'll help you choose.
Components that pair with the Deye OG03 Single-Phase Off-Grid Inverter for a complete solar setup.
Compare the available options and pick the best fit for your needs.